What should you review before transferring an existing product to a new manufacturer?

Before transferring an existing product to a new manufacturer, review five areas: the complete product documentation, the new partner’s certifications, whether the formula and packaging can move unchanged, the testing needed after the move, and the partner’s capacity and communication. A structured manufacturing transfer checklist prevents delays, quality drift, and compliance gaps.
The right preparation depends on the product type, since a cosmetic wipe, a biocide, and a medical device each carry different regulatory demands. Below, we walk through the questions buyers ask most often when planning a contract manufacturing transfer. If you want to see what a full-service partner can cover, take a look at Teampac’s hygiene products.

Which documents does a new manufacturer need first?

A new manufacturer needs the product specification, the full formula with ingredient grades, raw material and packaging specifications, current test methods, and the latest batch records. Together, these form the technology transfer documentation that lets the new site reproduce your product accurately from the very first batch.

Gathering these files early is the single best way to shorten a transfer. Missing or outdated documents are the most common cause of delays, because the receiving manufacturer cannot validate a process it cannot fully see. Check that every document reflects the current version of the product, not an older revision that was changed informally on the production floor.

Use this list as a starting point:

  1. Finished product specification with acceptance criteria and tolerances
  2. Formula and manufacturing instructions, including process parameters
  3. Raw material specifications and approved supplier details
  4. Packaging specifications and artwork files
  5. Analytical and microbiological test methods
  6. Stability and safety data, including any safety assessment
  7. Regulatory files, such as the product information file, technical file, or biocide documentation
  8. Complaint history and deviation records

Complaint and deviation history deserves special attention. It tells the new manufacturer where the product has been difficult to make in the past, so those points can be controlled from day one.

How do you check a manufacturer’s certifications and compliance?

Request current certificates, confirm they cover the product category you manufacture, and check the issue and expiry dates. For liquid-based hygiene, cosmetic, and healthcare products, relevant standards include ISO 9001, ISO 22716 for cosmetics GMP, ISO 13485 for medical devices, and ISO 14001. An audit confirms what the paperwork claims.

A certificate alone is not enough. Ask which sites and product groups the certificate covers, and whether the scope matches your product. A manufacturer certified for cosmetics may not be set up for medical device requirements, and the reverse is also true.

Regulatory fit matters just as much as quality management. Depending on your product, the manufacturer must be able to work within biocidal product rules, cosmetic regulation, or the Medical Device Regulation (MDR). Voluntary labels can matter too, such as Nordic Ecolabel, A&A, or Cosmos, if your brand relies on them. We hold ISO 14001, ISO 13485, ISO 9001, and ISO 22716 certifications and can manufacture to those voluntary schemes, so buyers can compare a supplier’s scope against their own needs.

When doing contract manufacturer due diligence, ask these questions:

  • Which certificates are current, and what is their scope?
  • When was the last external audit, and were there major findings?
  • How does the site handle change control and traceability?
  • Can you visit or audit the facility before committing?

Can your formula and packaging be transferred unchanged?

Often yes, but not always without adjustment. A formula can usually be transferred as is, though differences in equipment, raw material suppliers, and filling lines may require small changes. Any change should be assessed, documented, and tested before the product reaches customers.

Wet wipes are a good example. The wipe substrate, the lotion, and the packaging film interact, and a different mixing process or a different substrate supplier can change how the lotion is absorbed and released. Even when the recipe on paper is identical, the finished product can feel or perform differently.

Review these points before you assume an unchanged transfer:

  • Raw materials: Can the same grades be sourced, or are equivalents needed?
  • Equipment: Do mixing, impregnation, and filling methods match the original process?
  • Packaging: Are the same films, bottles, tubes, and closures available, and do they run well on the new line?
  • Labelling: Do artwork, claims, and legal text still comply after the change of manufacturer?

If adjustments are needed, our product chemists can reformulate or fine-tune the recipe so the product stays true to your original, and our team can help you find a packaging solution that supports your brand.

What testing is needed after a manufacturing transfer?

After a transfer, run pilot batches and verify that the product meets its specification. Typical testing includes physical and chemical analysis, microbiological testing, stability testing, and compatibility checks between formula and packaging. The goal is to prove the transferred product matches the original.

The depth of testing follows the product’s risk. A simple cosmetic wipe needs a different programme than a disinfectant or a medical device. For regulated products, changing the manufacturing site may also trigger updates to technical documentation, risk assessments, or safety assessments.

A practical post-transfer testing plan usually includes:

  1. Pilot batch to confirm the process runs as intended
  2. Specification testing against the agreed acceptance criteria
  3. Microbiological testing including preservation efficacy where relevant
  4. Stability testing to confirm shelf life, sometimes with accelerated studies first
  5. Packaging compatibility checks for leaks, seals, and lotion release
  6. Side-by-side comparison with retained samples from the previous manufacturer

The side-by-side comparison is easy to overlook, yet it is often the most convincing proof for your own quality team. Keep retained samples from the old supplier for this purpose.

How do you assess capacity, lead times, and communication?

Ask for current utilisation, realistic lead times for your volumes, and a plan for scaling up or down. Then judge communication by how clearly and quickly the manufacturer answers during the quotation stage. Responsiveness before the contract is usually a good predictor of responsiveness after it.

Capacity is about more than machine count. Consider raw material lead times, packaging availability, and how the manufacturer handles seasonal peaks. One of the main reasons companies outsource product manufacturing is flexibility, so a partner should be able to grow with you without forcing you to rebuild the relationship.

Compare candidates on these points:

  • On-time delivery performance and how it is measured
  • Minimum order quantities and batch sizes
  • Ability to scale volumes up or down
  • Named contact persons and escalation routes
  • Reporting rhythm, such as regular status updates during the transfer

We aim for nearly 100% on-time delivery and work with a close-knit team that stays in direct contact with customers throughout the project. Whichever partner you choose, make sure the communication model is agreed in writing, not assumed.

What risks should be planned for during the switch?

The main risks are supply interruption, quality differences between old and new batches, regulatory gaps, and unclear responsibilities. Plan for them with a safety stock, a phased changeover, clear approval criteria, and a documented change control process agreed before the first production run.

The most expensive mistake is switching suppliers too abruptly. If the old manufacturer stops before the new one is fully validated, any problem becomes a stock-out. A short overlap period protects your customers and gives you a fallback.

Build your risk plan around these steps:

  1. Build safety stock from the current supplier before the transition begins
  2. Agree on approval criteria so everyone knows what a successful transfer looks like
  3. Phase the changeover rather than switching all volumes at once
  4. Define ownership of documents, tooling, and artwork in the contract
  5. Set up change control so future modifications are assessed and recorded
  6. Review after launch with a joint lessons-learned meeting

Also check intellectual property and confidentiality terms early. Your formula and process knowledge are valuable assets, and the agreement should protect them both during and after the transfer.

A well-prepared transfer is a calm one. If you are weighing a move and want a second opinion on your documents, certifications, or testing plan, contact our team and one of our experts will reach out. You can also explore our full range of hygiene products to see what we manufacture from idea to finished product.

This content was generated with the help of AI and it may contain mistakes